Graphene on Ultra-fine 2000 Mesh Copper TEM Grids

Graphene on Ultra-fine 2000 Mesh Copper TEM Grids

Marsoni

M251S

$576.50

Get it in 3 business days with 1 day shipping. Friday, May 29

Graphene on Ultra-fine 2000 Mesh Copper TEM GridsCrystalline Structure of Graphene Film HAADF Image of single layer Graphene (bar = 1nm) on Holey Silicon Nitride product. Ref: J. Kotakoski, et. al. Nano Letters, 2015 This Graphene is directly supported by #G2000HA ultra fine 2000mesh copper TEM grids with 6. 5m circular holes and a pitch of 12. 5m. Transmission for this type of grid is 41%. The ultra fine 2000 mesh TEM grid is supported by #4510 Synaptek 1 x 2mm slotted grid to give it the required

Easy Shipping

Quick Dispatch:

Your Graphene on Ultra-fine 2000 Mesh Copper TEM Grids orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your Graphene on Ultra-fine 2000 Mesh Copper TEM Grids ships.

Need Help?
Questions about Graphene on Ultra-fine 2000 Mesh Copper TEM Grids, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for Graphene on Ultra-fine 2000 Mesh Copper TEM Grids in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

If you have a set of LED lights that didn't come with a harness , you can't beat this for the price. By the time you figure in the cost of the parts ( wire, switch, crimps/connectors, not to mention a relay if you are using one) to hardwire a set of lights, let alone the time to assemble, this set up is cheaper by far. harness length is ample, you get a pair of pigtails with connectors for a pair of lights, the relay, switch, fuse block and fuse, and ring terminals for power all assembled for what a switch and some wire would cost. Made everything quick, cheap, and easy.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on October 17, 2024

Verified Purchase

Miguel

Birmingham, US

★★★★★ 5

Great wiring harness for light installations.

Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads

This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on December 16, 2020

Verified Purchase

Marina De Leon

Lowell, US

★★★★★ 5

Nice

Size: 16AWG Wiring Harness-2 Leads

Worked great, easy to install

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on January 8, 2026

Verified Purchase

Dan from Georgia

Fort Morgan, US

★★★★★ 4

Wire length between the two connectors is short for a full-size pickup

Size: 16AWG Wiring Harness-2 Leads

I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 1, 2025

Verified Purchase

Nate Higgers

Chelsea, US

★★★★★ 5

great value

Size: 16AWG Wiring Harness-2 Leads

very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 30, 2026